KRK Kreate 3 White White 2 buc. Monitor activ de studio
The KRK Kreate 3 White is a compact 2-way active nearfield studio monitor pair built for musicians, producers, podcasters and content creators who need accurate monitoring on a desktop. A 3.5" woven glass fiber composite woofer pairs with a 3/4" textile dome tweeter driven by Class-D amplification to deliver a 70 Hz–33 kHz frequency response and 104 dB maximum SPL. Bluetooth 5.3, balanced TRS, RCA and 3.5 mm inputs cover every common studio and everyday source.
- 3.5" woven glass fiber composite woofer with ferrite magnet delivers tight, controlled low end down to 70 Hz
- 3/4" textile dome tweeter with neodymium motor extends high-frequency reproduction up to 33 kHz for mix-accurate detail
- Class-D amplification provides 32.5 W per channel (65 W total, 130 W dynamic) at reduced operating temperatures
- Bluetooth 5.3 A2DP plus balanced TRS, RCA and 3.5 mm inputs accommodate audio interfaces, HiFi gear and mobile devices
KRK Kreate 3 White — Compact Studio Monitoring with Wireless Freedom
The KRK Kreate 3 White is a 2-way active nearfield studio monitor pair built for musicians, producers, podcasters and content creators needing accurate desktop monitoring. Each enclosure pairs a 3.5" woven glass fiber composite woofer with a 3/4" textile dome tweeter, driven by Class-D amplification delivering 65 W total rated power (130 W dynamic) and a maximum SPL of 104 dB per pair. The system reaches from 70 Hz up to 33 kHz in a footprint small enough for desktop or bookshelf placement, with a left-active, right-passive configuration that keeps cabling tidy.
Composite Drivers, Acoustic Tuning and Wireless Connectivity
What sets the Kreate 3 apart from typical desktop monitors is the pairing of a woven glass fiber composite woofer cone with a neodymium-powered textile dome tweeter — a driver combination more often found on larger nearfield designs. The composite cone gives KRK control over damping and modal breakup, while the neodymium motor extends high-frequency response well beyond the audible band. Bluetooth Classic 5.3 with A2DP lets users reference mixes without touching a cable, and rear-panel shelving filters provide ±2 dB of HF and LF adjustment to compensate for room placement.
Driver Technology and Frequency Response for Mix Accuracy
The 3.5" low-frequency driver uses a woven glass fiber composite cone paired with a ferrite magnet, giving the woofer the rigidity and damping needed to reproduce bass without coloration. The 3/4" high-frequency textile dome tweeter with a neodymium magnet keeps mass low while extending response up to 33 kHz. A crossover at 3.06 kHz splits the signal between the two drivers, and the overall system reaches 70 Hz at the low end with a -10 dB point at 63 Hz.
- Low-Frequency Driver: 3.5" woven glass fiber composite cone with ferrite magnet — controlled damping for tight low end
- High-Frequency Driver: 3/4" textile dome with neodymium magnet — extends response to 33 kHz for accurate mix decisions
- Frequency Response: 70 Hz – 33 kHz (±3 dB) with low-frequency extension to 63 Hz at -10 dB
Class-D Power and Headroom for Long Sessions
Class-D amplification drives the active left speaker and the connected right passive unit, with 32.5 W per channel for a total rated output of 65 W and a dynamic headroom figure of 130 W. The Class-D topology keeps operating temperatures low during long mixing sessions, preserving audio integrity at sustained high SPL. A maximum SPL of 104 dB per pair gives the Kreate 3 enough output for typical nearfield listening distances of roughly one meter.
- Amplifier Configuration: Class D — efficient operation with reduced heat buildup
- Total Rated Power: 65 W (32.5 W per channel) with 130 W dynamic power output for transient headroom
- Maximum SPL: 104 dB per pair with SNR > 95.7 dB for clean playback
Inputs, EQ and Construction for Any Workspace
Connectivity is one of the Kreate 3's strongest selling points: balanced 6.3 mm TRS inputs handle professional audio sources, RCA accommodates HiFi gear, and a 3.5 mm stereo mini jack covers phones, tablets and laptops. Bluetooth Classic 5.3 with A2DP adds wireless streaming for casual listening or quick reference checks. Rear-panel shelving filters provide ±2 dB of HF and LF adjustment to dial in voicing for the room.
- Analog Inputs: Balanced 6.3 mm TRS, RCA, 3.5 mm stereo mini jack — covers audio interfaces, HiFi sources and mobile devices
- Wireless Input: Bluetooth Classic 5.3 A2DP — wireless streaming from phones and computers
- EQ and Tuning: HF and LF shelving filters (±2 dB) plus level control — adapts voicing to room placement
- Enclosure: PVC vinyl-wrapped MDF with reinforced polystyrene faceplate — 205 × 140 × 159 mm, 4.5 kg per monitor
Who Should Choose the KRK Kreate 3
Musicians, producers, podcasters and content creators who need accurate nearfield monitoring in a compact, desk-friendly enclosure will find the Kreate 3 a strong fit. Bedroom producers and home-studio engineers will appreciate the analog signal path and wide frequency response, while podcasters and video editors benefit from Bluetooth streaming for quick reference checks without rewiring. DJs and electronic music producers can use this model as a compact secondary monitoring system, and the white finish suits minimalist or bright studio setups where traditional black cabinets would feel visually heavy.
KRK Systems — Four Decades of Studio Monitor Design
KRK Systems has designed and built studio monitors since 1986, building a reputation among recording professionals for accurate, mix-ready sound. Today a subsidiary of Gibson, the brand has expanded from nearfield monitors into subwoofers and headphones.
Tip
Tipul driverului de frecvențe joase
Tipul driverului de frecvențe înalte
EQ
Controale
Volum, Bluetooth, Așteptare/Standby, Ajustare HF Level, LF Level Adjust
Bluetooth
ADAT
Interval de frecvență
Difuzor de joase
Difuzor înalte
Putere (Watt)
Putere
Difuzor bassreflex
Frecvență de încrucișare (kHz)
Frecvență de încrucișare
Culoare
Culoare conform producătorului
White
Material deflector
Intrări
AUX IN
Ieșire căști
Intrări de linie
USB
S/PDIF
Intrarea MP3 / Line In
Nivelul de presiune sonora - SPL (dB)
Configurare amplificare
Putere RMS (Watt)
Putere RMS
Nivelul de presiune sonora (SPL)
Alimentare electrică
100 - 240V
Telecomandă
Nu
Adaptor inclus
Nu
Lăţime (cm)
14
Adâncimea (cm)
15,9
Înălțime (cm)
20,5
Greutate
4,5 kg
Greutate netă (kg)
4,5
Ţara de fabricaţie
China
Documente
Instrucțiuni de utilizare
Informații despre producător
Instrucțiuni de siguranță
Te rog să consulți manualul de utilizare pentru instrucțiunile relevante privind siguranța produsului
